Characteristics: The two blades that open as the speed
rises generate an axial flow in the container, from the top
towards the bottom. Particularly recommended for stirring
in narrow-neck containers, e.g. flasks.

Characteristics: The blade that automatically falls into line
during rotation generates an axial flow in the container, from
the top towards the bottom. Particularly recommended for
stirring in narrow-neck containers.
Employment: Use at medium-high speed for whirling light
solids, flocculations, mixing thickening agents, stirring
sludge, etc.

Technical data:
Shaft Ø : 7 mm
Blade Ø: 60 mm
Shaft lenght: 400 mm

Characteristics: It generates an axial flow in the container,
from the top towards the bottom.
Employment: Use at medium-high speed for whirling light
solids, flocculations, mixing thickening agents, stirring
sludge, etc.

Technical data:
Shaft Ø : 7 mm
Blade Ø: 50 mm
Shaft lenght: 400 mm

Characteristics: Standard stirring shaft. It generates an
axial flow in the container with suction of the substance
from the bottom towards the top and localized occurrence
of shearing forces.
Employment: Use at medium-high speed for whirling light
solids, flocculations, mixing thickening agents, stirring
sludge, etc.

Technical data:
Shaft Ø : 7 mm
Blade Ø: 60 mm
Shaft lenght: 400 mm

Characteristics: It generates a tangential flow with
reduced turbulence and with gentle mixing of the product.
Employment: Use at medium to low speeds where good
heat exchange between the components to be mixed is
required.

Technical data:
Shaft Ø : 7 mm
Blade Ø: 69 mm
Shaft lenght: 450 mm

Characteristics: It generates a radial flow with suction of
the product from the top towards the bottom, with high
turbulence and high shearing forces.
Employment: Use at medium to high speeds to dissolve
and disintegrate particles.

Technical data:
Shaft Ø : 7 mm
Blade Ø: 49 mm
Shaft lenght: 450 mm

Characteristics: It generates an axial flow in the container
with suction of the substance from the top towards the
bottom with low shearing forces. Limited danger of any
contact of the blade with the walls of the product’s container.
Employment: Use at medium-high speeds for whirling light
solids, preparing dye mixtures and for flocculations.

Technical data:
Shaft Ø: 7 mm
Blade Ø: 46 mm
Shaft lenght: 450 mm

Characteristics: It generates a tangential flow with high
shearing forces on the ends. The flow generated limits the
possibility of sedimentation on the walls of the container.
Employment: Use at medium-low speeds for
homogenizing high contents of solids in liquids with
medium-high viscosity.

Technical data:
Shaft Ø: 8 mm
Blade Ø: 45 mm
Shaft lenght: 450 mm